| PART |
Description |
Maker |
| RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells
RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
| NR887D |
Current Mode Control, Synchronous Rectifier Step-down Switching Mode
|
Sanken electric
|
| FAN6920MR FAN6920MRMY |
Integrated Critical-Mode PFC and Quasi-Resonant Current-Mode PWM Controller
|
Fairchild Semiconductor
|
| A64S06161AG-70UF A64S06161A A64S06161A-70U A64S061 |
16M(1M x 16bit) Normal mode & Page mode Static Random Access Memory
|
AMIC Technology Corporation
AMICC[AMIC Technology]
|
| FAN6921 AN-6921 |
Integrated Critical Mode PFC / Quasi-Resonant Current Mode PWM Controller
|
Fairchild Semiconductor
http://
|
| MB82DBS02163E-70L |
32 Mbit Mobile FCRAM 1.8 V, Burst Mode & Page Mode
|
Fujitsu Limited
Fujitsu Component Limited.
Fujitsu Media Devices Limited
|
| SC16C852LIB SC16C852L SC16C852LIBS |
1.8 V dual UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode bus interface
|
Philips Semiconductors
NXP Semiconductors
|
| SC16C850IET SC16C850IBS SC16C850 |
2.5 V to 3.3 V UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA), and 16 mode or 68 mode parallel bus interface
|
NXP Semiconductors
|
| MX25L4006EM1I-12G MX25L4006EM2I-12G MX25L4006EPI-1 |
Serial Peripheral Interface compatible --Mode 0 and Mode 3
|
Macronix International
|
| SC16C850LIET |
1.8 V single UART, 5 Mbit/s (max.) with 128-byte FIFOs, infrared (IrDA) and 16 mode or 68 mode parallel bus interface
|
NXP Semiconductors
|
| ICE3BR1465JF |
Off-Line SMPS Current Mode Controllerwith integrated 650V CoolMOS? and Startup cell (frequency jitter Mode) in FullPak
|
Infineon Technologies AG
|
| ICE3BR1065J11 |
Off-Line SMPS Current Mode Controller with integrated 650V CoolMOS? and Startup cell (frequency jitter Mode) in DIP-8
|
Infineon Technologies AG
|
